How to Build Blokees Saint Seiya Champion Class Model Kits
By OR Anime | Published: 2026-10-22
Category: How-to Guides
Learn how to assemble Blokees Saint Seiya Champion Class model kits with clear steps, common mistakes to avoid, and tips for a clean build.
Quick answer
To build a Blokees Saint Seiya Champion Class model kit, follow the numbered runner layout, cut parts flush with a hobby nipper, and press joints firmly but gently to avoid stress marks. This guide walks you through each stage, from runner prep to final pose, with common mistakes called out along the way.
Why the Champion Class line is a good starting point
The Champion Class kits, such as Dragon Shiryu and Pegasus Seiya, are designed for snap assembly without glue or paint. The parts are molded in color, and the armor plates are pre-finished, so you can focus on the build rather than finishing techniques.
That said, the kits still require careful cutting and fitting. The energy effect parts are thin and can snap if you twist them off the runner, and the armor pieces fit snugly, so rushing a joint can leave white stress marks on the plastic.
Step-by-step assembly process
- Prepare your tools and workspace: Gather a hobby nipper, a craft knife or sanding stick, and a clean cutting mat. Organize the runners by number and check the instruction sheet to identify each part before cutting. A clean workspace prevents losing small parts.
- Cut parts from the runner: Use the hobby nipper to cut each part away from the runner, leaving a small nub. Then trim the nub flush with a craft knife or sand it down with a sanding stick. Do not cut directly at the part surface, as this can stress the plastic and leave white marks. Cut away from the part, not at the part.
- Assemble the inner frame first: Follow the instruction sheet to build the torso, arms, and legs before attaching the armor. Press joints together firmly but slowly, and check that each connection is fully seated before moving on. If a joint feels too tight, use a small file to gently widen the hole rather than forcing it. Test each joint's fit before applying full pressure.
- Attach the armor plates: Snap the armor pieces onto the frame in the order shown in the instructions. Some plates clip over existing parts, so align the tabs carefully and press from the center outward to avoid bending. If a plate feels loose, a tiny drop of plastic cement on the peg can secure it, but avoid glue on visible surfaces. Align tabs before pressing to avoid breaking clips.
- Add the energy effect parts: The dynamic energy effects are thin and fragile. Attach them last, holding them by the base and pressing gently into the designated peg hole. Do not twist or pull on the effect parts when adjusting the pose. Handle effect parts by the base to prevent snapping.
- Pose and display: Once assembled, move the joints through their full range of motion to loosen them slightly. Then set your figure in a dynamic pose that shows off the armor and energy effects. Use the included stand if provided, and keep the figure away from direct sunlight to prevent fading. Sunlight can fade the vibrant finish over time.
Kits referenced in this guide
- Blokees Saint Seiya Dragon Shiryu Action Figure Champion Class assemble Model Kit: The Dragon Shiryu Champion Class figure features detailed armor plates and dynamic energy effects that highlight his martial arts mastery. The energy effects are delicate, so take extra care when cutting and attaching them to avoid breaking the transparent parts.
Blokees Saint Seiya Dragon Shiryu Action Figure Champion Class assemble Model Kit - Blokees Saint Seiya Pegasus Seiya Action Figure Champion Class assemble Model Kit: The Pegasus Seiya Champion Class figure includes a fierce burst of energy that captures his fighting spirit, with a vibrant finish. The vibrant finish means fingerprints and scratches are more visible, so handle the armor pieces by the edges during assembly.
Blokees Saint Seiya Pegasus Seiya Action Figure Champion Class assemble Model Kit
